Dishracks

Commercial dishwasher racks are designed in all shapes and sizes for your plates, cups, glasses, cutlery and general purpose use. Racks will keep your items safe during wash cycles as well as in storage. Always ensure that the inside height of your dishwasher will fit the rack you choose, including glass height! Rhima racks are durable, stackable and ergonomically designed with a five year warranty.

Can’t find a rack that suits? We can custom build a rack to suit your items and requirements.

  • This field is for validation purposes and should be left unchanged.

Commercial Dishwasher open Rack 35 x 35, 350mm x 350mm.

Suitable for most bar washers GS-35 glass washer.

The 35x35cm rack is suitable for glasses and dishes. It is made of polupropylene to ensure longetivity and can be stacked.

Name: GS35 plastic rack-open (part number: 10730)

Size: 350mm x 350mm

 

Commercial Dishwasher divided or compartment Rack 35 x 35, 350mm x 350mm.

Suitable for most bar washers GS-35 glass washer.

The 35x35cm rack is suitable for glasses and dishes. It is made of wire with a plastic coating. These racks can be stacked however ensure that your glasses do not protrude from the top of the rack if you will be stacking them.

Name: Divided Glass Rack 16 glasses (part number: RH4x4GS-35)

Size: 350mm x 350mm

 

Name: Divided Glass Rack 25 glasses (part number: RH5x5GS-35)

Size: 350mm x 350mm

 

Commercial Dishwasher open Rack 40 x 40, 400mm x 400mm.

Suitable for most bar washers GS-40 or  High Sparkle 40.

This 40x40cm rack is suitable for glasses and dishes. It is made of polupropylene to ensure longetivity and can be stacked.

Name: GS40 plastic rack-open (part number: C121)

Size: 400mm x 400mm

 

This 40x40cm rack is suitable for glasses and dishes. It is made of wire with a plastic coating, these racks cannot be stacked easily and do not wear as well as the polupropylene racks as they are constantly in a wet environment.

Name: 40x40cm Rack – Open (part number: RH40x40)

Size: 400mm x 400mm or 17” x 14”

 

Commercial Dishwasher open Rack 50 x 50, 500mm x 500mm.

Suitable for most underbench and passthrough dishwashers GS-50 or High Sparkle 50 or HT-11 or HT-14 Optima or RX rack conveyor models.

This 50x50cm rack is suitable for flat and deep plates or bowls. The prongs help to hold dishes firm during wash cycles and also allows them to be hygenically cleaned with the correct spacing. It is made of polupropylene to ensure longetivity and can be stacked.

If required, two racks can be placed in the underbench dishwasher stacked on top of each other to wash more items in half the time. However please ensure cups and glasses are placed in the lower rack & plates and cutlery are placed on the upper rack. Ensure that items are not out of gauge on the lower rack.

Name: Glass Basket grey (part number: 010G)

Size: 500mm x 500mm

 

Commercial Dishwasher plate Rack 50 x 50, 500mm x 500mm.

Suitable for most underbench and passthrough dishwashers GS-50 or High Sparkle 50 or HT-11 or HT-14 Optima or RX rack conveyor models.

This 50x50cm rack is suitable for glasses and dishes. It is made of polupropylene to ensure longetivity and can be stacked.

If required, two racks can be placed in the underbench dishwasher stacked on top of each other to wash more items in half the time. However please ensure cups and glasses are placed in the lower rack & plates and cutlery are placed on the upper rack. Ensure that items are not out of gauge on the lower rack.

Name: Plate Rack (part number: C40)

Size: 500mm x 500mm

 

Commercial Dishwasher tray Rack 50 x 50, 500mm x 500mm.

 

 

Suitable for most RX rack conveyor models.

This 50x50cm rack is suitable for trays as it has an open edge that allows for longer trays. It is made of polupropylene to ensure longetivity and can be stacked.

Name: Tray Basket (Green) (part number: 060GR)

Size: 500mm x 500mm

 

Commercial Dishwasher divided or compartment glass Rack 50 x 50, 500mm x 500mm.

Suitable for most underbench and passthrough dishwashers GS-50 or High Sparkle 50 or HT-11 or HT-14 Optima or RX rack conveyor models.

These compartments can be paired with our standard 010G racks and heightening frames to create a custom rack suitable for your needs. These create specialised glass racks suitable for glasses as the compartments prevent breakages and damage to glassware during the wash cycles. These racks can be custom built and adjusted to suit the height of your glassware. They are made of polupropylene to ensure longetivity and can be stacked. The Rhima High Sparkle diswashers come with a soft start which means that the water pressure is slower from the get go, so if you cannot afford the compartment racks, just a standard rack will do the job and prevent breakages! These machines are handy in high turnover environments such as bars and nightclubs.

OPTIONAL: Name: Heightening Rack (part number: 020G)

 

 

Colour: White (part number: 016GWhiteDivider – grey rack & heightening frames sold separately)

Capacity: 36 glasses – Ideal for Champagne glasses or glasses with a max diameter of 72mm

 

 

 

 

Colour: Red (part number: 017G RedDivider – grey rack & heightening frames sold separately)

Capacity: 49 glasses – Ideal for Champagne glasses or glasses with a max diameter of 60mm

 

 

 

 

Colour: Yellow (part number: 014GYellowDivider – grey rack & heightening frames sold separately)

Capacity: 16 glasses – Ideal for large wine glasses or tumbler glasses with a max diameter of 110mm

 

 

 

 

Colour: Blue (part number: 015GBlueDivider – grey rack & heightening frames sold separately)

Capacity: 25 glasses – Ideal for wine glasses or tumbler glasses with a max diameter of 87mm

 

 

Drip tray for 500mmx500mm racks

Drip tray for 500mmx500mm racks

Suitable for most 500mmx500mm racks.

This drip tray allows racks drying time when they come straight out of the dishwasher and eliviates issues of water pooling on benches, floors, other glassware.

Name: Drip Tray for 500x500mm basket (part number: 4550064)

 

Cutlery Cylinder or Basket

Cutlery can be a pain to clean, especially in flat rack as you almost always have to put it through another one or two cycles. A cutlery cyclinder or basket will eliviate issues with food scraps and they will ensure a more hygenic clean.

Name: Cutlery Basket (yellow) (part number: C47)

Size: 490 x 180 x 140 H

 

 

Name: Cutlery Cylinder (grey) (part number: 15060)

 

Saucer holder

Suitable for GS-35 and GS-40 benchtop and underbench machines as they do not have a dedicated plate rack. This small plate holder sits inside the standard machine racks when washing. It allows for plates to be hygenically cleaned.

Name: Saucer Holder (part number: 10728)

 

Stainless steel Utensil Holder

Suitable for LP models, where utensils are being washed and need to be stood upright to get the most efficient clean.

Name: S/S Utensil Holder (part number: C86/A)

 

Tray Rack for LP models

Suitable for LP models, where trays are being washed and need to be stood upright to get the most efficient clean.

Name: Tray Rack (part number: C97/A)

 

Combination bed pan and urine bottle racks

These are medical use racks. For ease of use and quick drying, we have created 2 multipurpose racks to be secured to the wall in dirty utility rooms or similar. These racks come with a drip tray and are designed for item storage after bedpans and urine bottles or containers have been disinfected in a Deko 190 washer disinfector.

Name: 6 Bedpan and 6 bottle rack with drip tray (part number: RHIC2785)

 

Kidney Bowl Rack

These are medical use racks. These racks are for washing and disinfecting kidney bowls in the Deko 190 washer disinfectors. They allow for washing of multiple kidney dishes at once.

Name: Double Kidney Bowl Rack (part number: 381685A)

 

 

Name: Kidney Bowl Rack (part number: RHIKBR5)

 

  • Other racks include but not limited to;
      • Machine inserts – these are for when you go the next size up or down in a dishwasher but can’t afford to replace all the racks. Don’t worry, Rhima has you covered with a machine insert, we can alter almost any machine to suit any type of rack. Just ask our friendly team!
      • Large LP model replacement racks.
      • Custom designed racks to suit your requirements.

Next Steps:

  1. Email us [email protected] and quote your required part number to place your order or request a quote
  2. Call us on 1300 347 944 to find out how we can help you